All In One Mushroom Grow Bag Fruiting | Shoebox Tek (2024)

All In One Mushroom Grow Bag Fruiting | Shoebox Tek. Are you looking to maximize your mushroom yields? Combining the all-in-one mushroom grow bag and shoebox tek can be a cost-effective method.

Maximizing Mushroom Fruiting with All-In-One Grow Bags and the Shoebox Tek

In this guide, we’ll walk you through the steps to combine these techniques and achieve larger harvests.

Even if you’re a beginner exploring just new mushroom cultivation, this easy-to-follow process will help you grow your own mushrooms successfully.

Table of Contents

I. What is the shoebox method?

All In One Mushroom Grow Bag Fruiting | Shoebox Tek (1)

The shoebox method, or shoebox tek, is a popular technique in mushroom cultivation. In this approach, a plastic shoebox or a container of similar size is used as a controlled environment for growing mushrooms.

By creating a suitable microclimate within the shoebox, optimal conditions are provided for the growth and development of mushrooms.

Furthermore, the shoebox method is favorable for its simplicity and effectiveness, making it a popular choice among mushroom cultivators.

II. How to combine an all-in-one mushroom grow bag and shoebox tek?

To combine the all-in-one mushroom growing kit and shoebox tek, begin by ensuring your grow bag substrate is fully colonized by the mycelium.

Once it reaches this stage, you have two options: proceed to the fruiting stage by (1) directly fruiting from the grow bag or (2) incorporating the shoebox tek for larger yields.

If you choose the latter, follow the steps below to maximize your harvests.

Step 1: Flatten the Grow Bag and Prepare the Substrate

Firstly, flatten the substrate horizontally within the grow bag and create a uniform layer. This step may require breaking up any hardened colonized substrate to create a uniform layer.

Step 2: Observe the Development of Mushroom Pins

After a few days, tiny mushroom pins will appear on the surface of the substrate. These pins indicate that the mushrooms are ready for the next step.

Step 3: Open the Bag and Transfer it to the Shoebox

When you notice the mushroom pins, carefully cut open the top of the bag horizontally. Then, transfer the flattened substrate from the grow bag to a shoebox tub.

Step 4: Secure the Shoebox Lid

Next, place the lid on top of the shoebox to create a controlled environment for mushroom growth.

Step 5: Maintain Moisture and Humidity

To ensure optimal conditions, it is important to mist the inside sides of the shoebox with a fine water mist three times a day. This regular misting helps to maintain moisture and high humidity.

In turn, it encourages the growth of the mushroom pins. After each misting session, be sure to securely cover the shoebox with the lid.

Step 6: Monitor Growth and Continue Misting

To ensure proper growth, it is important to regularly check the shoebox for progress and monitor the growth of your mushrooms.

If necessary, mist the inside sides to maintain a moist and humid environment, creating favorable conditions for mushroom development.

Repeat this process daily to maintain optimal moisture levels until you achieve a full first flush of mushrooms.

Step 7: Harvest Your Mushrooms

After a week or two, your mushrooms will be ready for harvest. Gently pluck or cut the mature mushrooms from the substrate, and they are ready to be enjoyed!

III. How much mushroom yield per shoebox?

The shoebox method is a widely recognized technique in mushroom cultivation that offers a yield of around 1 ounce of mushrooms per flush.

Traditionally, each shoebox undergoes two flushes, although exceptional cases of up to nine flushes have been reported, albeit infrequently.

The yield of Curative Mushrooms’ all-in-one grow bags

However, mushroom growers can optimize their results by incorporating Curative Mushrooms’ CVG (coco coir and vermiculite) and oats grow bags into their cultivation process.

With these innovative grow bags, it becomes feasible to achieve up to six flushes, presenting an excellent opportunity for higher yields compared to conventional shoebox methods.

By harnessing the advantages of these specialized mushroom bags, cultivators can enjoy an abundant harvest and maximize their mushroom production.

Get your 3-In-1 Shroom Bomb Shoebox/Tub Kit here

IV. Shoe Box Tek vs. Monotub Tek

All In One Mushroom Grow Bag Fruiting | Shoebox Tek (4)

The shoebox method and the monotub method are two popular techniques used in mushroom fruiting, each with its own distinct characteristics.

In the shoebox method, a plastic shoebox or similar-sized container is used as the growing environment for mushrooms. It is a smaller-scale approach suitable for growers with limited space or resources.

In this method, the substrate is typically spread evenly in the shoebox, and multiple shoeboxes can be used simultaneously to increase the overall yield.

On the other hand, the monotub method involves using a larger plastic container, such as a storage tote or bin, as the fruiting chamber.

Monotub Tek for larger-scale cultivation

The monotub provides a more controlled and optimized environment for mushroom growth. Aditionally, it allows for larger yields compared to the shoebox method, with typical yields ranging from 3 to 6 ounces per flush.

Moreover, monotubs are designed to accommodate a greater quantity of substrate, providing more room for mycelium colonization and mushroom production. This method usually undergoes multiple flushes, and growers can expect three to five flushes on average.

Overall, while the shoebox method is suitable for smaller-scale cultivation and can yield decent results, the monotub method offers a higher potential yield due to its larger size and improved environmental control. The choice between the two meth

Final thoughts on combining all-in-one-mushroom grow bag and shoebox tek

Maximize your mushroom yields by combining the all-in-one mushroom grow bag and shoebox tek. This method allows for larger harvests and is suitable for beginners and experienced growers alike.

Follow these steps to successfully grow your own mushrooms:

  1. Firstly, flatten and transfer the colonized grow bag substrate to a shoebox;
  2. Next, maintain optimal moisture and humidity;
  3. Then, monitor growth;
  4. Finally, harvest your mushrooms when they’re ready.

Enjoy the convenience and fruitful results of this approach! Happy mushroom growing! 🙂

________________________________

FDA DISCLAIMER

Curative Mushrooms has to post the standard FDA Disclaimer…The statements made regarding medicinal mushrooms have not been evaluated by the Food and Drug Administration. The efficacy of these products has not been confirmed by FDA-approved research. Curative Mushrooms is not making claims intended to diagnose, treat, cure or prevent any disease. All information presented here is not meant as a substitute for or alternative to information from healthcare practitioners. Please consult your healthcare professional about potential interactions or other possible complications before consuming the medicinal mushrooms. The Federal Food, Drug and Cosmetic Act requires this notice.

MEDICAL DISCLAIMER

This content is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of such advice or treatment from a personal physician. All readers/viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Curative Mushrooms nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.

_________________________________

0 Shares

All In One Mushroom Grow Bag Fruiting | Shoebox Tek (2024)

FAQs

What are the fruiting conditions for all in one mushroom bag? ›

Once colonization is complete, it's time for fruiting. To encourage fruiting in your all in one grow bag, cut or puncture holes in the bag for fresh air exchange. Place it in a bright location with high humidity. The mushrooms will then begin to form and mature within a few weeks.

Do all in one mushroom grow bags work? ›

Growing your favorite mushrooms just got a lot easier with our all-in-one grow bag system, the ShroomTek. This pre-sterilized grain and manure substrate mix is all you need to grow your favorite dung-loving mushrooms with ease - no prior experience growing mushrooms is required!

Why is my mycelium not fruiting? ›

Flexi Says: There could be several reasons why your mycelium is not fruiting. These could include incorrect temperature, insufficient light, lack of fresh air exchange, improper humidity, or the substrate not being fully colonized. It's also possible that the mycelium is not healthy or is contaminated.

What does a fully colonized all in one grow bag look like? ›

The grain should be fully colonized with white mycelium first. This video shows the second step of growing mushrooms from an “All-In-One” growbag. You want to be sure that the grain is pretty much 100% colonized with white mycelium covering the entirety of the bottom grain layer.

How long does it take for all in one grow bag to colonize? ›

Colonization occurs after inoculation. This is when the mycelium will start to take over the grain that was inoculated with spores. This period usually lasts between 3 to 6 weeks depending on strain and environmental conditions.

Is my mushroom bag ready to fruit? ›

After a few days, you will start to see little white spots forming in your substrate. Eventually, these will take over the entire bag. For oyster mushrooms, the entire process takes about two to three weeks. You will know your bag is ready to fruit when the entire substrate is covered with bright white mycelium.

How do you force mycelium to fruit? ›

That is done through a process called forcing triggers the mycelium to produce fruiting bodies (mushrooms) predictably, within a short period of time. “Shocking” is how it's done. Shocking involves soaking logs in cold water for an extended period of time (12 to 24 hours) to induce fruiting.

How do I get mycelium to start fruiting? ›

Initiation is the link between mycelial growth and mushroom formation. This is the time when the substrate is fully colonized and maybe even showing signs of pinning. To initiate fruiting, lowering temperatures and increasing oxygen levels generally encourages mushroom formation.

What does bad mycelium look like? ›

Spend time getting to know what your mycelium is supposed to look like so you can better identify unhealthy or contaminated patches. While mycelium is typically white and filamentous, contamination generally takes the form of green, blue, gray, or black patches or discolorations in your substrate.

How do you know when mycelium is fully colonized? ›

You can tell when mycelium is fully colonized when the entire substrate (such as a jar or a bag) is covered with a dense, white, and fuzzy network of mycelial threads. There should be no visible uncolonized areas or contaminants, and the mycelium should appear healthy and vigorous.

What are optimal mushroom fruiting conditions? ›

Humidity. The humidity with a fruiting chamber must remain high in order to encourage pinning and to all the growing mycelium to retain as much water as it can hold. The relative humidity(RH) of the air around fruiting mycelium should be at least 90%.

Why is my mushroom block not fruiting? ›

Severe lack of fresh air &/or light: otherwise healthy block! Mushrooms are the opposite of plants in that they 'inhale' oxygen and 'exhale' CO2: much like us humans. Oyster mushrooms in particular produce a lot of CO2 as they grow, and need a steady supply of fresh air to develop normal fruit bodies.

What temperature and humidity should a mushroom fruiting chamber be? ›

Button mushrooms, temperature of 75-77 degrees Fahrenheit for mycelium growth then once the mycelium is fully formed temperature range should be 53-60 degrees & 90% for air humidity level. For straw mushrooms it's 95 degrees wherein growth can occur between 59-113.

What are the fruiting conditions for Pleurotus ostreatus? ›

Optimum fruiting occurs when temperatures between 50-80F, but it can produce as high as 95F. Outdoors it fruits well on oak, sweetgum, poplar, and many other hardwood species.

References

Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated:

Views: 6476

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.