Home | Featured | Junipine Wild Ale
5 from 6 votes
By Hank Shaw
April 17, 2017 | Updated June 17, 2020
Jump to Recipe
As an Amazon Associate I earn from qualifying purchases.
This beer began as pure experiment. It has become an obsession.
The entire reason I started brewing beer is to incorporate foraged elements into the brew. Mostly this means adding either wild adjunct grains, like wild rice, or botanical additions that contribute flavor. I do this with fresh, green fir tips in my fir tip ale, and with juniper berries in my NorCal gose beer.
Anyone who knows me know I love the aroma and flavor of juniper. Well, as it happens, juniper berries are coated in wild yeast. Yeast that can brew beer.
Working with wild yeast is an adventure. The bloom on grapes, plums and juniper berries is a clear indicator that wild yeasts are present (the bloom itself is not yeast, however, it’s a waxy substance that just tells you the wee yeasties are present.) Most fruits have yeast on them, as do most flowers.
Harvesting that yeast is as simple as dropping the fruit into something fermentable. Like beer wort.
I did this with some juniper berries I’d gathered in the high Sierra Nevadas. The same berries I made the gose from. Only this time I dropped them into a test wort — really some leftover I had from an experiment with a wild rice ale; that experiment continues. Sure enough, I got a nice ferment! It smelled nice, and I tasted the resulting beer, and it was good, even when flat.
So I ramped up the experiment and made a gallon tester batch. I added a bunch of chopped up needles from our local bull pine, Pinus Sabiniana, and when the beer was ready to bottle, a touch of 88% lactic acid I’d bought from the brew shop, as well as some oak chips I’d boiled first, so they would not add any other microbes to the party. Why? It just seemed right.
And it was. I brought Junipine to Sam Horne’s, a local beer geek bar in Folsom, California where I hang out at. I gathered some influential beer people: brewers as well as serious connoisseurs. Everyone thought this was my best beer yet.
Drinking this beer will transport you into a cool Sierra Nevada day. You can absolutely pick up both the pine and juniper. The yeast character is there, but not so strong as it is in, say, a saison. It is a largely red ale, hearty without being overly malty or hoppy. The oak is subtle, adding a little backbone and vanilla — but you’d never know it was there if I didn’t tell you. Finally, the lactic acid is not nearly enough to make this a proper sour beer, but it seems to amplify all the music coming from the glass.
Junipine is the best beer I’ve yet made.
Here’s how you can make your own version of a juniper wild ale.
To make a this wildale, you needfirst to be set up for brewing. If you are, you’re good to go. If you’re not, there is equipment you need to do this right. At a minimum, you will need:
- A large pot, or several slightly smaller ones. I used a regular stockpot plus another soup pot before I got abrew kettle.
- A thermometer. I highly recommend a laser thermometer. I use this one
. - A gram scale. Yep, precision matters in beer making. This is the scale I use.
- Something to ferment in. I prefer glass carboys, which are large jugs, but some people prefer buckets.
- An airlock. You need to keep air off the fermenting beer at the same time you let CO2 escape. The airlock does the trick.
- A strainer. A fine-meshed strainer removes debris, called trub, and the stray bits of seasoning and hops.
- Sanitizer. Yes, you need it. There are any number of good ones out there, but I use either Iodophoror Star-San.
- Bottles, caps and a capper, or a kegging system.
- And, of course, you need malt and hops. Your nearest homebrew store will have all of this stuff, or you can buy it online.
.
I use.
or Star-San.
Estimated stats on this recipe:
Estimated Alcohol by Volume (ABV): 5.4%
IBUs: 25, but the pine needles and juniper berrieswill add additional hoplike bitterness and aromas
Original Gravity and Final Gravity: 1.055, going down to 1.016
To Make the Yeast Starter:
- Boil about 3 cups malt extract (I used light dry malt extract), then cool it to about 85°F.
- Drop in a handful of foraged juniper berries, dry or fresh (Not sure if store-bought have yeast on them still)
- Cover whatever container you are using. If a Mason jar, screw on the lid just barely.
- Put in a cool, dark place and check it every day. Shake it around. In two to four days, you should see yeast activity.
5 from 6 votes
Juniper Wild Ale
This is a red ale with moderate carbonation, a slight bit of tartness -- but not enough to make it a true sour -- and with strong aromas of juniper, with a backnote of pine. I am still primarily an extract brewer, but feel free to modify this to be an all-grain ale if you want to. One alternative in terms of malt is to use Munich instead of Maris Otter, which I did in the first incarnation of this beer. Note that the yeast on my juniper berries is slow and steady, so you should not need a blow-off tube.
Save RecipePin RecipePrint Recipe
Course: Drinks
Cuisine: American
Servings: 3 gallons
Author: Hank Shaw
Prep Time: 1 hour hour
Cook Time: 1 hour hour
Total Time: 2 hours hours
Ingredients
- 3.15 pounds Maris Otter extract (56%)
- 1.25 pounds rye malt extract (22%)
- 1 pound dry light extract (17.7%)
- 4 ounces Special B malt (4.5%)
- 28 grams Fuggles hops, added at 60 minutes to go in the boil
- 1 Whirlfloc tablet, added at 10 minutes to go (helps clarify beer)
- 60 grams juniper berries, half added with 5 minutes to go, half added at knockout
- 58 grams chopped pine needles, added at knockout
- 1 quart juniper starter
- 1 ounce oak chips, boiled for 1 minute first
- 6 teaspoons 88% Lactic acid (optional)
Instructions
Steep the Special B malt. Put the malt into a grain bag or tie it up loosely in cheesecloth and cover it with 3 quarts of water. Bring this to 155°F to 165°F over medium heat and hold it at this temperature for 1 hour. Remove the bag and set it over the pot in a strainer. Pour 2 quarts of water heated to 170°F over it to rinse the grain. Let the bag drain for 10 minutes, then remove. Discard the grain or feed it to animals.
Start the boil. Add 2 more gallons of water to the pot and bring this to a boil. Add the hops and set the timer for 1 hour.
With 30 minutes to go, add all the extracts and stir well.
If you are using it, add the Whirlfloc to the boil along with the wort chiller, if you have one. This will sanitize the chiller.
With 5 minutes to go, add half the juniper berries.
Knockout. Turn off the heat and add the final addition of juniper berries along with the chopped pine needles.
Crash chill the wort. Use your wort chiller to chill the wort back to 75°F or cooler, depending on how warm your tap water is. Or, put the pot in a cooler with lots of ice water in it. Use a clean spoon to create a whirlpool in the wort, which will help it chill faster. Hopefully you will see gnarly bits in the wort that look like egg drop soup, or separating miso in soup: That's cold crash trub, and seeing it means you will have a clearer beer.
Move the wort to the fermentor. Add the juniper yeast starter to the fermentor; I use a glass carboy. Pour the contents of the pot through a sanitized strainer into the fermentor. If the strainer gets all gunked up with trub, remove it before continuing. Put a sanitized airlock on the fermentor and put the beer in a place where it can ferment cool, ideally 66°F to 69°F. Leave it there for 2 weeks.
Add the boiled oak chips to a new sanitized carboy and rack the beer into it. I do this only if there is a lot of crud in the fermentor. If it's OK, I just add the oak chips to the primary fermentor. Either way, let the beer finish fermenting for 10 more days.
Bottle or keg the beer. If you are bottling, you want to add enough priming sugar to the batch to get about 2 volumes of CO2, about 1.8 ounces or 51 grams for 3 gallons. Add the lactic acid to the bottling bucket. Bottle condition the ale 2 weeks before opening the first bottle. This beer ages well.
Nutrition information is automatically calculated, so should only be used as an approximation.
Tried this recipe? Tag me today!Mention @huntgathercook or tag #hankshaw!
Categorized as:
Featured, Foraging
You May Also Like
Mexican
Chacales
Chacales are roasted, dried and cracked corn typically cooked in soups. Also called chichales or chuales, it makes a great meatless soup for Lent.
Italian
Alpine Bread Soup
If you are looking for a delicious, thing to do with stale bread, you could do a whole lot worse than make a batch of bread soup: It’s quick, easy and only uses a few ingredients.
American Recipes
Sauerkraut Casserole
An easy-to-make casserole or hotdish, sauerkraut casserole is basically German lasagna: Sauerkraut, venison or beef, noodles and cheese. What’s not to love?
Mushrooms
Mushroom Tortellini
When life gives you mushrooms, make tortellini out of them. I love these little packets of love, and making them with wild mushrooms is especially lovely.
